Create a new bank account

This guidance is only for IRIS Financials Version 7.0.2103 or earlier. If using version 7.0.2223 or later, go to Add bank accounts to IRIS Financials.

If your establishment / organisation has extra bank accounts or opens a new bank account, you can set up an account for it in IRIS Financials to record, import, and reconcile payments.

When adding the details of a new bank account, you also need to set up a suitable bank nominal to which the new bank account is then assigned.

Adding a bank account consists of the following:

Creating a bank account nominal

Create a bank account nominal

Before creating a new bank account, you need to make sure you have an applicable nominal set up to assign to the new account. In the IRIS Financials Education standard, the 9400-9409 nominals are typically reserved for bank accounts. A bank nominal is only created for extra bank accounts if the 9400 nominal is already linked to a bank account therefore is not available to be linked to the new bank account.

Do not use a bank nominal that is already linked to or has been used for an existing bank account, or that has existing posted documents against the nominal.

Creating a bank account nominal consists of these steps:

Check for an available bank nominal

  1. Go to Maintenance, then select Nominals from the menu.

  2. The Nominal Maintenance window opens. Find the bank nominals group for your establishment / organisation (AST9400 - AST9409, (where AST represents the location code of the nominal) in the left-hand panel. In this graphic, there are no free nominals between 9400 and 9409, so you need to create a nominal.
    If a nominal already exists in the bank nominal group (9400 - 9409) that is not in use with a bank account, then you may want to rename the nominal and link it to the new bank account.
    . For more information, refer to Editing an existing nominal.

Create the core nominal

If there are no available bank nominal codes, then you need to create a new one.

  1. Go to Maintenance, then select Keylists from the menu.

  2. The Keylist Maintenance window opens. Select NOMINALS - Core Nominals from the left-hand panel, select ADD NEW, then select KEY. A <New item> appears at the end of the list of nominal keys and automatically selected.

  3. Next, enter the core (4 digit numerical code from the bank nominal group 9400 - 9409) for the nominal in Key for example 9401. Then enter a title to help identify the bank account nominal in the software in Title

  4. An Update complete message appears. Select OK to close the message and return to the window.

Create the nominal

When you have created the core nominal, you can create the nominal.

  1. Go to Maintenance, then select Nominals from the menu.

  2. The Nominal Maintenance window opens. To create the new nominal, select ADD NEW, then select NOMINAL. A <New item> appears in the left-hand panel and automatically selected.

    If the new nominal has the same settings as an existing nominal, you can copy the existing nominal to create the new nominal. On the Nominal Maintenance window, select the nominal you want to copy from the left-hand panel, select ADD NEW, then select NOMINAL (COPY).

  3. Next, enter the code for the nominal(location and core nominal code) in Nominal , for example, AST9401 (where AST represents the location code of the nominal). Then enter a title for the nominal in Title, for example, AST Second Bank Account.

  4. Next, select the nominal type as Balance Sheet from the Type list. Then, to determine the state of detail lines when documents are posted to the nominal, select Open External from the Initial State list.

  5. Select the Analysis tab, then complete all of the analysis fields. Select ... in the analysis field, then double-select to select the required option from the displayed field dialog. Typical analysis field codes are as this graphic shows.

    If you are unsure which option to select for an analysis field, contact the person within your establishment/organisation who administers your system, such as a CUSTADMIN user.

    Nominal Maintenance window for the AST9401 nominal with the Analysis tab selected. The Location, CoreNominal, Management Reporting, CFR, SOFA and EFA boxes are highlighted.

  6. Next, select the Indices tab. If you have the latest EFA Budget Forecast index, select EFABFR201819 - EFA Budget Forecast 201819 from the Indices list, then select 700BS - Cash at bank and in hand from the Values panel.

  7. Next, select NOMTYPE - Nominal Type from the Indices panel, then select B/S - Balance Sheet from the Values panel.

  8. Finally, set the security roles for the nominal to determine which users can view, modify, and post to the nominal. Select the Security tab, select Drill (...) in View, Modify, Post, and Add ledger, then double-select to select the required security role from the Select a role for Nominal dialog.

    For more information, refer to Overview of security roles.
    If you select no security roles, all users with appropriate access levels can carry out all the functions (view, modify, post, add a ledger, and so on).

  9. When you have completed all the required details for the nominal, select SAVE.

  10. An Update complete message appears. Select OK to close the message and return to the window.

Create an account for the bank account

Create an account for a bank account on the following ledgers:

  • Bank Accounts - is used to import and reconcile the bank account.

  • Bank Ledger - is used to create a BACS file to make payments from the bank account.

  • Location Bank Ledger - is used to post accounting transactions (for example, a Nominal Receipt) to the bank account.

Follow the instructions for each of the required ledgers:

Create the account for the bank account ledger

  1. Go to Banks, then select Bank Accounts from the menu.

  2. The Bank Account Maintenance window opens. To create an account for the bank account, select ADD NEW, then select BANK ACCOUNT. A <New item> appears in the left-hand panel and is automatically selected.

    If the new account has the same settings applied to an existing account, you can copy the existing account to create an account for the new bank account. On the Bank Account Maintenance window, select the bank account you want to copy from the left-hand panel, select ADD NEW, then select BANK ACCOUNT (COPY).

  3. Enter the bank account number in Bank account, the sort code for the bank account in Sort code (do not enter any spaces or hyphens), and the name of the bank account in Title.

  4. Next, select the nominal to which the bank account is to be linked. Select ... in Nominal, then double-select to select the required nominal from the Select a nominal dialog.

    Do not use a bank nominal that is already linked to or has been used for an existing bank account, or that has existing posted documents against the nominal. You must create a new nominal for the bank account. For more information, refer to Creating a bank account nominal.

  5. If there are funds in the bank account, enter the value of the funds in Balance, for example, 1000.00 (do not enter any currency symbols, £, $, and so on), then select SAVE.

  6. An Update complete message appears. Select OK to close the message and return to the window.

Add the bank account to the Banks ledger

  1. Go to Maintenance, then select Accounts from the menu.

  2. The Select a ledger dialog opens. Double-select to select the BANKS - Banks Ledger.

  3. The Account Maintenance window opens. To add the bank account details, select ADD NEW, then select ACCOUNT. A <New item> appears in the left-hand panel and is automatically selected.


    If the new account has the same settings applied to an existing account, you can copy the existing account to create an account for the new bank account. On the Account Maintenance window, select the bank account you want to copy from the left-hand panel, select ADD NEW, then select ACCOUNT (COPY).

  4. Firstly, enter the bank account number in Account, then enter the title of the bank account in Title.

  5. Next, set the security roles for the bank account to determine which users can view, modify, and post to the account. Select the Security tab, select Drill (...) in View, Modify, and Post, then double-select to select the required security role from the Select a role for Account dialog. For more information, refer to Overview of security roles.

    If you select no security roles, all users with appropriate access levels can carry out all the functions (view, modify and post).

  6. When you have completed all the required details for the bank account, select SAVE.

  7. An Update complete message appears. Select OK to close the message and return to the window.

Add the bank account to the location bank ledger

  1. Select Maintenance, then select Accounts from the menu.

  2. The Select a ledger dialog opens. Double-select to select the required bank account ledger for your >establishment/organisation location.

  3. The Account Maintenance window opens. To add the bank account details, select ADD NEW, then select ACCOUNT. A <New item> appears in the left-hand panel and is automatically selected.

    If the new account has the same settings applied to an existing account, you can copy the existing account to create an account for the new bank account. On the Account Maintenance window, select the bank account you want to copy from the left-hand panel, select ADD NEW, then select ACCOUNT (COPY).

  4. Firstly, enter the bank account number in Account, then enter the title of the bank account in Title.

  5. Next, select the Indices tab, select FUNDTYPE - Fund Type from the Indices list, then select the required fund type from the Values panel. If you are unsure which fund type option to select, select XNODET - No Detail Selected or Required.

  6. To link the bank account to the bank nominal, select the Analysis Fields tab, then enter the nominal code in Bank Nominal.

  7. Next, set the security roles for the nominal to determine which users can view, modify, and post to the nominal. Select the Security tab, select Drill (...) in View, Modify, and Post, then double-select to select the required security role from the Select a role for Account dialog. For more information, refer to Overview of security roles.

    If you select no security roles, all users with appropriate access levels can carry out all the functions (view, modify, post and so on).

  8. When you have completed all the required details for the bank account, select SAVE.

  9. An Update complete message appears. Select OK to close the message and return to the window.

Set the bank account as the default bank account

When you have created the account for the bank account on the bank ledger, you can set the bank account as the default bank account for your establishment / organisation. For more information, refer to Set the default bank account for a location.