Raise purchase orders

In IRIS Financials Purchasing you can create a new purchase order without having previously entering a requisition. This process should be used if your establishment/organisation either do not have or use an internal process for requisitions. You can also raise a purchase order from an existing, authorised requisition. For more information, refer to Raise an order from a requisition.

Creating a purchase order has these stages:

Create the purchase order

  1. From the Home page, select Order.
  2. The Select your Supplier window opens. Either scroll through the list or search for the required supplier using the Search Criteria field. You can enter any element of the supplier account code or name/title. The list is then reduced based on the criteria entered.
    By default, any element of the supplier account code, name/title is searched. If you find the search is taking longer than expected, deselect Advanced Search. Select your Supplier window listing three suppliers. The Only show suppliers with items to progress checkbox is highlighted.
  3. Select to select the required supplier. The Select your detail lines window opens. Select New.
  4. A blank Purchase Order appears.

Complete the purchase order details

The delivery address defaults to the address specified in the Current User settings tab (accessed by selecting the Settings icon on the Home page). This is usually your establishment/organisation address, however here may be multiple delivery addresses for separate departments or locations.

  1. If there is no delivery address displayed, or you want to change the delivery address, select the Pencil icon to edit the address.
  2. From the Select your Delivery Address window, select to select the required address. Select your delivery address window listing three addresses. The second address, LLL2, is highlighted.
  3. Use the centre section of the document to complete details relating to the order. Purchase order with the details section highlighted. A note says the pencil icon opens a calendar so you can select a different date, and a calendar for December 2018 is open.
  4. Select the Pencil icon to open a calendar to select a different date.
  5. Complete/edit the remaining order information as follows:

Comments

Enter any comments relating to the purchase order. There are two potential uses for the comments field:

  • You can add comments for internal use (for example, to provide information for the purchase order authoriser, such as Refer to attachments for quotes). It is important to note that these comments are also available to the supplier once you send the purchase order, so the authoriser needs to remove them before they authorise the order.

  • You can add comments for the supplier, such as delivery instructions or any special requirements.

Document date

Is populated with the current date. You can change this to any historic date by selecting the Pencil icon, selecting the required date from the calendar, then selecting Done. For example, you may need this if you want the system purchase order to match an internally generated purchase order document.

Required date

Select the Pencil icon, select the required date from the calendar, then select Done. Enter the date that you need the items by.

Period

Defaults to the current accounting period. If you need to change the date for a retrospective purchase order, select the Pencil icon, select the required date from the calendar, then select Done.

If you change the accounting period in the purchase order details, the accounting period for each item line is not automatically updated. This is intentional as you may want an individual item posted to a different accounting period. As a consequence, if you amend the accounting period in the purchase order details and have existing items in the purchase order, the period for each item line in the extra information section should be check to make sure it correctly reflects the required account period. Select the down-arrow at the end of the applicable item line, as this graphic shows.

Reference

Enter any required reference in Reference, such as a quote number or an establishment/organisation reference number. The reference is carried through to the Goods Received Note when the Purchase Order is authorised.

Discount

If you know a discount is available for the order when it is placed, enter the details here. The discount applies to all the item lines in the purchase order. If required, you can edit the discount for any individual item lines by selecting the down-arrow at the end of the required item line.

Any discounts entered are carried through to the next document in the purchasing process - in this case, the Goods Received Note (and then Invoice).

Add required items to the purchase order

When you complete the document details, you can enter the items for the purchase order. Complete the process for each required item.

  1. If known, enter the supplier item stock code in STOCK, then press Tab to move to the next field.
    If a supplier catalogue has been imported into IRIS Purchasing, when you point to STOCK, a Magnifying Glass icon appears. Selecting the Magnifying Glass icon lets you select a stock code, which automatically fills in Description and Price.
  2. Enter a description for the item in DESCRIPTION for example, Blue Exercise Books.
    You can enter an unlimited number of characters, but only 30 characters appear in DESCRIPTION. The system automatically copies any description over 30 characters to Comments in the extra information section. You can open this by selecting the list arrow on the far-right of the item line. Item line for exercise books with the down arrow at the end of the line highlighted.
  3. Enter the quantity in QTY and unit price in Price for the item (do not enter any currency symbols, such as £ or $)
  4. The VAT CODE defaults to the standard rate. Your System Administrator can change this setting, so it may be different. If you do not know the VAT code, you can change it at invoice stage. However, if you need to amend the VAT Code, in VAT CODE, select the Magnifying Glass icon, then select to select the required VAT Code.
  5. The NET, VAT, and GROSS are automatically calculated.
  6. In Nominal, select the Magnifying Glass icon, then select to select the required nominal from the Select window. Alternatively, enter a relevant word for example, book in Nominal. The system then displays any matching nominals, select the required nominal from the list.
  7. Select the cost centre account to charge the item to. You can do this only after you select a nominal. In Account, select the Magnifying Glass icon, then select to select the required cost centre from the Select window. Alternatively, enter a relevant word for example, maths in Account. The system then displays any matching nominals, select the required nominal from the list.
    You can set up a default cost centre account on the General tab of the Settings window (select the Settings icon on the Home page). If this setting is not available, contact the person within your establishment/organisation who administers your system, that is, has a CUSTADMIN login.

Add additional item information

You can add extra information to each item by selecting the down arrow on the far right of the item line.

The fields that appear in the Details section are defined by the person within your establishment/organisation who administers your system, that is, has a CUSTADMIN login.

You can apply a specific Period or Discount to the item by amending the applicable field. You can also add extra information in Comment.

If you change the accounting period in the purchase order details, the accounting period for each item line is not automatically updated. This is intentional as you may want an individual item posted to a different accounting period. As a consequence, if you amend the accounting period in the purchase order details and have existing items in the purchase order, the period for each item line in the extra information section should be check to make sure it correctly reflects the required account period. Select the down-arrow at the end of the applicable item line, as this graphic shows.If you previously entered more than 30 characters in the item Description, the full description appears in Comment.

Validate an item line

When you have finished adding the item information, select the Tick icon to validate the line.

If the validation fails, an error message appears, and each incorrect field shows a message.

Correct or enter the required information, then validate the item again. Validate the line before you add further items.

Add more items

When the item line has been successfully validated, a new line is automatically created. The total Net, VAT, and Gross for the purchase order are automatically updated to reflect the validated items. Purchase order with a validated item line, the action icons at the end of that line highlighted, a new empty line below, and the net, VAT and gross totals highlighted.

Use the icons to the right of the validated item line to make amendments as follows:

Icon

Description

Pencil icon.

Select to edit the item details. You need to validate the item once complete, irrespective of whether you have made any changes.

Copy icon.

Select to produce a copy of the current item that can then be amended and validated.

Bin icon.

Select to delete the current item.

Down arrow icon.

Up arrow icon.

Select this to show any extra information about the item including for example Period, Discount and Comments. The fields displayed here are defined by your System Administrator and consequently may vary from these. The icon changes to an up arrow, which closes the extra information.

Tick icon.

Select this to validate any new or amended item line.

Complete the new item information as previously described. If the item is similar (for example, yellow exercise books), it can save time to copy the existing item line, then make amendments as described in the following section.

If you know the delivery charges at this stage, add them as an extra item line. It is best practice to add them only if you have access to the correct nominal/account to apply delivery charges to. If in any doubt, do not enter the deliver charges as these can be added at the invoice stage, or check with the person within your establishment / organisation who administers your system, that is, has a CUSTADMIN login.

Copy existing items

To copy an existing item, select the Copy icon on the item line to be copied. A new line appears with exact same content.

Make the required amendments. In this example, the colour of the books has been amended to Yellow.

Validate the line in the usual way. The Net, VAT, and Gross for the purchase order are automatically updated to reflect the new items.

Open or add attachments

You can add attachments to the purchase order at any point during or after you create it. For example, you may want to attach a quote, an email, or a photo. For more information, refer to Add attachments to documents.

Check the budget before posting

Depending on how your administrator set up your system, the system may show Check Budget. This functionality is often used by cost centre managers, such as heads of department, to check the impact of this order on their budget.

If Check Budget appears, select it to check the impact of this purchase on the selected budget/nominal and whether the item is within budget limits. In this example, the order falls within the applicable budget. If the order goes over budget, the window shows the line as over budget. Select Back if you need to return to the order to make amendments. The name of the budget the items are being checked against appears in the Budget Information window.

This window may appear slightly different if your administrator set up your system to check a budget at account level. In this case, it is grouped on account code and a nominal column is not displayed.

Post the purchase order

If you are likely to use this purchase order again, that is, you regularly order the items, you can save it as a template for reuse. For more information, refer to Create document templates.

  1. Once you enter and validate all the required items, select Post Order.
  2. Error messages appear if any of the item lines have not be validated or data is missing (the system marks the affected fields).
  3. Depending on how your administrator set up your system, the Budget Information window may appear. In this example, the order falls within the applicable budget. If the order goes over budget, the window shows the line as over budget. The name of the budget the items are being checked against appears in the Budget Information window.
    This window may appear slightly different if your administrator set up your system to check a budget at account level. In this case, it is grouped on account code and a nominal column is not displayed.
  4. Select Edit Document to make any amendments to the purchase order based on the budget impacts or select Proceed to post the purchase order.
  5. When the purchase order has been successfully posted, a purchase order document number is automatically generated, and a success message appears. Select the message displays a read-only copy of the purchase order.
  6. By default, the Home page then appears. You can change this on the Current User tab in settings (select the Settings icon on the Home page), so that the read-only version of the document appears automatically. For more information, refer to Personalising IRIS Purchasing.
  7. The purchase order is now ready for authorisation. The system sends an email to the person responsible for authorising the purchase order.