Apply Licence on an ID Point
You need to create an IDPoint licence and copy it to a USB drive before you'll be able to apply it. An IDPoint cannot be used until it has been licensed.
To apply the licence, insert the USB drive that the licence is saved on into the USB port on the side of the IDPoint, and then restart the IDPoint by removing and reconnecting the power. When the IDPoint displays Initialising... on the screen, press the F1/ESC key. The IDPoint will then display Starting Setup. The following options will be displayed:
- Update Licence
- Update Firmware
- Delete Licence
Press the 1 key to select Update Licence. If you've created more than one IDPoint licence, you can cycle through them using the up and down arrow keys. Once the licence you want to apply is displayed, select the F4/OK button to apply it. The IDPoint will display Saving licence, please wait. After the licence has been applied, the IDPoint will display the network settings that you just applied to it, and the message Waiting to Connect.
The IDPoint is now ready to connect to the IRIS BioStore application. You may need to restart the service from the application's Control tab for the IDPoint to connect.
If you make any changes to an IDPoint's configuration in the IRIS BioStore application, you'll need to reapply the updated IDPoint licence.